The Divesoft Freedom CCR Bottom Timer has been specially developed in order to meet the needs of technical divers using ratio deco for decompression calculations. It features a clear and legible colour TFT display, which allows you to easily read all essential information in conditions of poor visibility or even without a mask.
The CCR Bottom Timer can be connected to a rebreather with the included O2 sensor cable. One, two or three O2 sensors can be connected. Each separate sensor value, as well as the average pO2 value can be read on the primary screen. Furthermore, detailed information about each sensor, including sensor voltage, can be accessed via a separate screen.
The operational depth for this bottome timer is 300 metres (1,000 ft) and its heavy-duty aluminium case was tested to 600 metre. The dive profile is visible in real time during your dive; it is recorded, can be seen in the device’s logbook and can be downloaded onto a computer, mobile phone or tablet, using the included USB cable. This USB cable is also used for charging the battery.
The well-arranged TFT display is highly readable in harsh conditions and bad visibility. The Freedom has visual and vibrating alarms to grab your attention. The Divesoft Freedom displays are protected by protector display overlay.
Divesoft Freedom CCR Bottom Timer Features
Full colour TFT display Four screens during the dive including the graphical dive profile and sensor screen
Reversible display for left/right hand
Durable aluminium body
300 metre (1,000 ft) operational depth Metric/imperial units
Depth average with the possibility to restart
Easy-to-use two button control
Rechargeable Li-Ion battery High-precision depth sensor
Vibrating alarms strong enough for a drysuit
Decompression games Textile strap or bungee wrist mount
Log processing in the cloud or offline
Connection to one, two or three oxygen cells Software version upgradeable
Free firmware updates
USB connection and charging
You can choose from two variants of the fastening strap:
Fastening strap #1482, 35.5 cm long, or
Fastening strap for dry suit #1483, 42.5 cm long.
Dimensions: 9 x 7 x 2.5 cm, screen 2.4"
Divesoft Freedom CCR Bottom Timer contents:
- Freedom CCR Bottom Timer #8103
- O2 cells connection cable #8076
- USB charger #8075
- bungee gum #1481
- fastening strap #1482, or fastening strap for dry suit #1483
- silicon protective sleeve #0832
Divesoft Freedom Bottom Timer User Manual (EN)
(PDF, 40 pages, 1.5 Mb)
This is not a regularly stocked item in our Rye dive shop. It will be ordered for you from the manufacturer upon request and typically shipped direct from them to you the same day thus resulting in no delay in delivery.