Shop by Category

banner banner

OMS Comfort Harness System II with Stainless Steel Backplate

OMS-115180** - Superseded Model
OMS
$699.00



The OMS Comfort Harness System II with Stainless Steel Backplate combines these two great OMS products completely assembled so you have more time to go diving! Simply add a wing/aircell of your choice and weight pockets (if needed) and you are ready to jump in the water. An accessory comfort pad is also available.

Harness: The OMS Comfort Harness System II is perfect for those who want a quality diving harness. The Comfort Harness System II is direct over the shoulder harness - the same padded shoulder strap configuration found on the OMS IQ Pac. The OMS Comfort Harness now incorporates a pull dump tunnel on each shoulder pad. Harness system with (4) chest mounted D-rings, (2) waist strap D-rings and a crotch strap O-ring all made from corrosion-resistant stainless steel. The waist strap is equipped with a latch style stainless steel buckle and the adjustable torso and chest (sternum) straps are equipped with squeeze-style side-release plastic buckles for easy donning and doffing.

Stainless Steel Back Plate: OMS's superior de-burring process eliminates backplate sharp edges and prevents abrasion and cuts to webbing and BC's. The Stainless Back Plate weighs only 2.6 kg (5.75 lbs) and includes the following slots: 2.54cm and 5.1cm (1" and 2") width crotch strap, (2) cam band, and a bottom slot to accommodate band bolts that are slightly off 27.94cm (11") on centre. Stainless steel plate is passivated to prevent oxidation and now incorporates additional slots to mount cam bands for single cylinder configuration. The plate has 22 holes for flexibility in accessory mounting.

Back Plate and Harness come with an owner's manual and are covered by a 12-month limited warranty.

OMS Comfort Harness System II with Stainless Steel Backplate Features

  • Stainless Steel Back Plate:
    • Superior De-Burring Process
    • Design: Eliminates Sharp Edges, Prevents Abrasion and Cuts to Webbing and BC's
    • Corrosion Resistant Stainless Back Plate
    • Weight: 2.6 kg (5.75 lbs)
    • Plate Webbing Slots:
      2.54 cm and 5.1 cm (1" and 2")
      Cam Band
      Bottom Slot: Accommodate Band Bolts, Slightly Off 27.94 cm (11 inch) On Centre
      Slots to Mount Cam Bands for Single Cylinder Configuration
      Passivated to Prevent Oxidation
      22 Holes for Flexibility in Accessory Mounting
  • Harness: OMS Comfort Harness System II
    • Quality Diving Harness
    • Stainless Steel D-Rings: (4) Chest Mounted, (2) Waist Strap, Crotch Strap O-Ring
    • Direct Over-the-Shoulder Harness
    • Pull Dump Tunnel on Each Shoulder Pad
    • Fully Padded Shoulder Straps
    • Waist Strap: Stainless Steel Latch Style
    • Sternum (chest) and Adjustable Torso Straps
    • Torso/Sternum Straps: Equipped with Plastic Squeeze-Style Side-Release Buckle
  • 12 Month Limited Warranty
  • Owner's Manual

OMS Comfort Harness II Sizing

Comfort Harness II Size S-M L XL
Chest 26″-46″ 30″-50″ 35″-55″
Height 64″-70″ 68″-74″ 72″-78″
Weight 130 lbs.-180 lbs. 160 lbs.-210 lbs. 190 lbs.-240 lbs.

Stock Status: Discontinued Stock. Once sold out, that's it! Sadly, there are no returns, refunds, or exchanges on discontinued stock.

(01/22 LRB)


Connect with us on Facebook - scubadoctor  View our YouTube Channel - ScubaDoctorRye  Follow us on Instagram  View us on Pinterest - scubadoctor  Follow us on Twitter - @scubadoctor
The Scuba Doctor Australia
Boon Wurrung Country
1/49 Peninsula Ave
Rye Victoria 3941, Australia
Commonwealth Coat of Arms
We accept Purchase Orders from Government Departments & Schools
Contact
P +613 5985 1700
E diveshop@scubadoctor.com.au
-------------------------
Opening Hours
-------------------------
Shop by Category
-------------------------
Brands
Copyright © 2005-2024 by The Scuba Doctor Australia, ABN 88 116 755 170. All rights reserved. tel. +61 3 5985 1700 :: email. diveshop@scubadoctor.com.au :: Web site by it'sTechnical 2022