This Sonar Low Pressure (LP) 3/8-inch UNF Male to Apeks/SeaQuest Locking Quick Disconnect (QD) screws into the 2nd stage regulator end of any standard regulator hose. It converts a standard LP regulator hose into an Apeks/SeaQuest style quick disconnect hose. It features a locking mechanism so that a hose can't be accidentally disconnected.
Turns any standard LP regulator hose into a high-flow performance Apeks/SeaQuest style quick disconnect system for regulators.
Compatible with the quick disconnect fitting used on the following BCDs:
- Oceanic Air XS
- Aeris Air Link
- SeaQuest Air Source
- Apeks Octo Plus
- Zeagle Octo Plus
- Beauchat Venturi
- US Divers Air Mic
The 9/16"-18 UNF Male end of this QD adaptor screws into the 9/16"-18 UNF Female end of a standard LP regulator hose.
The female end of this QD adaptor accepts the male end of an Apeks Octo Plus, SeaQuest AirSource (including 1, 2 and AirSource3 QD), Zeagle Octo-Plus, Aqualung Air Mic, Mares Air Control, Beauchat Venturi, US Divers Air Mic, Oceanic Air XS and Aeris AirLink and compatible BCD/Jacket/Inflator/Octopus low pressure quick disconnect fitting.
- Durable marine grade chromed brass construction
- Low pressure only - below 200 psi
- Factory cleaned - Nitrox ready
Other fittings used in the system include:
Sonar Apeks/SeaQuest Inflator/Ocy QD to 9/16" Female LP Apaptor (LH-A)
This adaptor goes onto a 2nd second stage regulator and then the male end can be used as a QD with this adaptor.
Sonar Apeks Inflator/Ocy QD to Standard Inflator QD LP Apaptor (LH-B)
Converts an Apeks/SeaQuest and compatible combined BCD/jacket/inflator/octopus quick disconnect hose into a standard BCD/jacket/inflator quick disconnect LP hose.
Sonar 3/8" UNF Male to Apeks/SeaQuest Inflator/Ocy QD LP Apaptor (MA-02)
Popular with side mount systems and rebreather bail out valve (BOV) setups.
- LP hose side of rebreather BOV QD: Attaches to Low Pressure regulator hose and is sealed when not plugged in!
- Connector has locking ring for added safety
- Add it to your bailout system or deco bottle for easy switching
- NOT compatible with CEJN fittings
Note: Each fitting is sold separately and you'll need to determine how many of which fittings you need to build your system.