Do you need more High Pressure Ports on your Scuba Regulator? Use the Sonar HP 7/16" Male to Two 7/16" Female UNF Y-Port Adaptor to add an additional high-pressure port to your first stage regulator. The additional HP port allows for 360º swivel. Adaptor has one 7/16-20 UNF Male to two 7/16-20 UNF Female Outlets (common HP port).
Stock Status: Currently out of stock. Please email or call for an availability update.
Add an additional High Pressure port to your 1st stage regulator.
While many regulator first stages incorporate a pair of high-pressure ports, it's not uncommon, especially with entry-level 1st stages, to have just a single HP outlet. This is fine if you're using a typical hose mounted SPG or console, but to enjoy the benefits of a wireless air pressure transmitter for your dive computer, while retaining the separate SPG as a backup, you'll find two won't go into one.
This adaptor makes a great addition for the safety-minded diver who wishes to run a SPG and air integrated dive computer off the same HP Port, or for regulators with only one HP port.
The 7/16"-20 UNF Male end of this spacer adaptor screws into a standard HP port on a first stage regulator.
The two 7/16"-20 UNF Female port ends of this adaptor accept the 7/16"-20 UNF Male end of a standard HP hoses that normally screws into a standard HP port on a first stage regulator.
The Sonar High Pressure Port Adaptor is made from corrosion-resistant, chrome-plated brass and is rated for 345 bar (5,000 psi). Factory cleaned - Nitrox ready
Sonar HP Y-Port Adaptor Features
- Add an additional high pressure port to your regulator's first stage
- Additional port allows for 360º swivel
- One 7/16-20 male to two 7/16-20 female outlets (common HP port)
- Chromed brass construction
- High pressure use - Maximum 345 bar (5000 psi)
- Factory cleaned - Nitrox ready