The Sonar Inflator Hose Air Blower Gun has a rubber air nozzle on one end and a standard BC inflator male quick-release post on the other end. Normally closed, you depress the side of the rubber air nozzle to release and regulate air flow. With this you can inflate buoys, beach toys, balloons, etc. from a scuba cylinder tank using a first stage regulator and BC inflator hose. Also works well as an air gun to use compressed air to blow dry equipment.
If you own your own dive gear and cylinders this is a great item to add to your gear bag. The Sonar Inflator Hose Air Blower Gun attaches to your BCD Low Pressure Inflator Hose allowing you to blow dry your regulator cylinder and other items before you stow them for the next dive, or better yet before you put all that wet sandy gear in the trunk of your car for the ride home. Make clean up easier with this handy Sonar Inflator Hose Air Blower Gun.
The Sonar Inflator Hose Air Blower Gun can also be real handy in the garage or home for clearing dust, sawdust, equipment, tools etc. Easy to use just attach it to your Regulator LP Inflator Hose and turn on your cylinder air. To activate air just bend the rubber tip and a stream of over 100 psi of air will clean up or dry off anything quickly and efficiently.
This male end of this adaptor connects to the standard outlet on a low pressure BCD/jacket/inflator hose.
Sonar Inflator Hose Air Blower Gun Features
- Great for dive gear preventative maintenance
- Handy around the garage and home
- Easy to use bend activated
- Attaches to standard regulator inflator hose
- Great item to have in your gear bag
- Chromed brass and rubber construction
- Low pressure only - below 200 psi