For Dive Shop Sales
Call 03 5985 1700

Catalina C95 Aluminium Cylinder - 11.3 litre (95 cu ft) 228 bar

Starting at: $575.00  $519.00
Save: $56.00 (10%)

  • Model: CY10390
  • Brand: Catalina Cylinders

Please Choose:


Product Description

Catalina C95 (11.3 litre, 95 cubic foot), 228 bar, Aluminium Cylinder with DIN/K Valve. High grade aluminium constructed especially to meet Australian safety standards. Negatively buoyant when empty. Rugged enough for rental gear or sport diving.

The increased air capacity and lower price of the C95 aluminium cylinder over the older S80, leads many to consider it to be a cheap alternative to the Faber 12.2 litre steel cylinders. Many dive operators are switching over to the Catalina C95 for their hire and training cylinders.

Because of it's highly regarded buoyancy characteristics, the Catalina C95 aluminium cylinder is now also starting to be used as large stage/pony tank(s) by technical divers going really deep, or on very long dives. For longer, deeper dives they often use these cylinders to carry a Nitrox mix (e.g. EAN50, 50% oxygen) to accelerate their decompression on accent. The Catalina C95 is a great cylinder for doing this.

We supply a DIN to Yoke convertible, cross-flow valve as standard. The valves are made by Ocean Design. They are strong and reliable being made from really top quality materials. The valve regulator connection incorporates a threaded insert, which means it can equally be used for both INT bracket (Yoke) or DIN connection.

Note: If you require your cylinder unvalved, instead of a convertible DIN/Yoke valve, please specify when you order.

Valve Oxygen Cleaning:
The Catalina aluminium cylinders are supplied Oxygen (O2) clean, suitable for use with up to 100% oxygen. However, if you are planning to use the cylinder with Enriched Air Nitrox (Nitrox) mixes up to 100% oxygen, it's essential for the safety of the cylinder user and the person filling the cylinder that the valve be oxygen cleaned and prepared with special o-rings, seats, and grease designed for exposure to pure oxygen. The cylinder should then be banded with the familiar yellow and green Nitrox band/wrap/sticker, and an Oxygen Clean 'In Test' inspection sticker applied. The Scuba Doctor can do all of this for you as an add-on service.

Catalina C95 Scuba Cylinder Specifications

  • Working Pressure: 228 bar (3300 psi)
  • Test Pressure: 402 bar (40.2 MPA)
  • Material: High strength aluminium alloy 6061-T6
  • Catalina C95 SP12 TC-3ALM204
  • Water Capacity: 11.3 L
  • Tare: 17.1 kg
  • Neck Thread: 3/4 inch NPSM
  Dimensions Water Capacity Buoyancy*
Water Cap. Diam. Len. Empty
cu in lbs litre Full
500 psi
95 cf
11.3 litre
7.25 in
184.2 mm
27.6 in
701 mm
37.6 lbs
17.1 kg
690 24.9 11.3 -6.0 -0.7 +0.6

* Buoyancy is calculated with a standard K valve in seawater

Colour: Brushed Aluminium.

All scuba tanks for delivery are sold EMPTY due to restrictions in place on the transportation of high pressure cylinders. If you are picking up your order instore, The Scuba Doctor will be happy to give you a FREE air fill.

Regulation and Inspection: Cylinders comply with Australian Standards and are stamped with the Australian Standards Authority Number. All Catalina seamless aluminium alloy compressed gas cylinders imported in to Australia are manufactured in accordance with US Department Of Transport (DOT) 3AL and Transport of Canada (TC) 3ALM requirements. Every cylinder is inspected and tested by a DOT and TC authorised independent inspection agency.

International shipping: Not available.
Shipping within Australia: Email or call for prices.
Our standard freight fees do not apply.
All cylinders are shipped unfilled with the valve off.

Note: We will only ship cylinders to locations in Australia.

(01/18 LRB)

Related Products