The premium Best Divers Stage Strap Kit for 160 to 180 mm diameter cylinders
comes complete with all of the components needed to create a streamlined,
secure and DIR compliant mounting of stage and decompression cylinders.
This kits suits cylinders with a diameter of 160 to 180 mm.
This includes Catalina C95 and S80 aluminium cylinders,
plus Faber 12.2 standard, 10.5 and 9 litre steel cylinders.
The Best Divers Stage Strap Kit is based on straps made from
high tensile strength nylon webbing that resists breakage and splitting,
to create a durable and long-lasting foundation for stage rigging.
It's also better than round cord because it does not stretch and
lies very flat against the side of the cylinder.
A loop to encircle the neck of the valve, together with a
stainless steel crown snap, attaches the top of the cylinder
to your shoulder strap D-ring.
The strap then runs through a piece of removable vinyl tubing
that creates a handle for use in the water.
Another stainless steel snap on the tail of the strap is held in place
with an all stainless steel, sheathed clamp at the bottom of the cylinder.
The sheathing ensures there are no corrosion issues between the
stainless steel strap and the cylinder.
With this Best Divers Stage Strap Kit there is no
metal to metal contact between the two bolt snaps and the cylinder.
Should a bolt snap become seized for whatever reason,
this allows the bolt snap to be cut free and removed.
The two cold water, stainless steel bolt snaps feature a large eye,
allowing a thick gloved thumb or finger to easily fit inside the eye
when in use.
The Best Divers Stage Strap Kit also includes two high quality
stretch band, hose retainers for the storage of hoses against the
cylinder. These bands include finger loops to make it easier to
stow your hoses.
Here at The Scuba Doctor this is how we rig all of our stage
cylinders. Rigging a cylinder is this manner is minimal yet secure,
providing stream lining and increased safety.