The Sea & Sea Diffuser for the YS-01, YS-02 and YS-03 Strobes give better contrast and richer colours, increase the angle of coverage, soften shadows, reduce backscatter, and lower the colour temperature of 5,600K to 5,200K.
Many people avoid using a camera flash because it washes people out, creates harsh shadows, and usually overpowers the background of the photo. You want to take better pictures underwater so you need a diffuser for your strobe.
The Sea & Sea Diffuser for YS-01/02/03 Strobes will give you better contrast and richer colours when taking pictures. The diffusers attach easily above and below the water. The Diffusers are made from Noncorrosive Plastic Materials. Use of the accessory diffuser softens the light and helps reduce backscatter. So take better pictures with a diffuser on your strobe.
Use of the accessory Diffuser drops the light level. The beam angle of 100 degrees in increased to 110 degrees with the diffuser. The colour temperature of 5,600K is reduced to a colour temperature with a diffuser of 5,250K.
The Diffuser fits on the front of the YS-01, YS-02 and YS-03 strobes and has a Fibre Optic Cable Port that lines up with the strobe's slave trigger.
Sea & Sea Diffuser for YS-01 YS-02 YS-03 Strobe Features
- Take Better Pictures Underwater
- Better Contrast and Richer Colours
- Softens the Light from Strobe
- Reduce Backscatter
- Attaches Easily to Strobe Unit
- Increases Angle-of-Coverage to 110 Degree Beam Angle
- Softens Shadows and Edges of Light Beam
- Lowers Colour Temperature of 5,600K to 5,250K
- Fibre Optic Cable Port: Lines-Up with Strobe's Slave Trigger
- Non-Corrosive Plastic
This is not a regularly stocked item in our Rye dive shop. It will be ordered for you from the manufacturer upon request and typically shipped directly from them to you the same day thus resulting in no delay in delivery. However, if they are out of stock this item becomes a special order from Japan typically resulting in a 4- to 6-week delay.
Note: This item cannot be delivered outside of Australia.