Sea & Sea Fibre Optic Cable II L/2 Connectors-Long 725mm

This 725 mm (28.5 inch) Long length Fibre-Optic Cable II from Sea & Sea is for use in underwater photography. It has two closed-end fittings for use with all Sea and Sea housings and strobes. The cable is not "one-directional". It may be used in any direction, meaning either end may be applied to the housing or the strobe. The FOC II is designed for the use of the new Internal Optical YS-Converter.

The best quality Fiber-Optic Cable is composed of 613 fibres (cores). Even when the cable is bent, attenuation of light is minimal. Therefore, the light signal will be transmitted to a strobe without loss. Compared with single fibre cables, the Fiber-Optic Cable II is more resistant to distortion, bending and physical impact.

Specifications:

• Construction: Methacrylic Resin
• Fibre Diameter: 1.5mm / 0.059 inch
• Cable Diameter: 2.7mm / 0.105 inch
• Length: 725mm / 28.5 inches

Drop Ship
This is not a regularly stocked item in our Rye dive shop. It will be ordered for you from the manufacturer upon request and typically shipped directly from them to you the same day thus resulting in no delay in delivery. However, if they are out of stock this item becomes a special order from Europe typically resulting in a 4- to 6-week delay.

Note: This item cannot be delivered outside of Australia.

(04/23 AG)