This plastic cylinder boot fits 65 to 95 cubic foot Aluminium Cylinders, i.e. cylinders with a 184 mm (7.25 inch) diameter and flat base.
Stock Status: Supplier currently out of stock without an ETA.
To protect the bottom of your cylinder, and to limit roll — put on a tank boot.
All Scuba cylinders need a tank boot to protect the lower surface from damage. Faber steel cylinders need a tank boot even more with their round bottom design. The boot allows the tank to stand up straight on a stable flat surface making mounting of buoyancy compensators, harness systems and regulators easier.
These self-draining flexible PVC boots are easy to assemble to the tank.
184 mmm Diameter Plastic Boot for Flat Bottom Aluminium Cylinders
- 184 mm (7.25 inch) Diameter
- To suit 65 to 95 cubic foot Aluminium Cylinders
- All Scuba Cylinders Need Tank Boot
- Protect the Cylinders Lower Surface from Damage
- For Aluminium Flat Bottom Tanks
- Self-Draining Design
- Hexagon Outer Lip Prevents Rolling
- Corrosion Proof Plastic Construction
Cylinder Boot Installation
If you're buying a tank at the same time, we'll install it for you — simply ask in your notes section at checkout.
If you are going to install it yourself, put the boot in very hot water to soften it up, then install it by dropping the tank securely into the boot until it reaches the bottom.
TOP TIP: Remove your cylinder boots every 3 months and wash the base of the cylinder and the boot to prevent unwanted corrosion.