Shop by Category
- This product is also found in:
- BC/BCD Wings
- Apeks
The Apeks WTX-D40 Single Cylinder Donut Wing with 40 lb lift capacity keeps the streamlined approach to diving at the forefront of it's development. This Donut wing has been developed for the recreational diver who wants the best.
Single cylinder wings, often referred to as donuts, are oval shaped air cells or bladders that are not permanently attached to a harness. While single cylinder wings have their origins in the realm of technical diving, they are becoming very popular in the recreational community. Not only are these Apeks single cylinder wings streamlined, but due to their shape being a continuous loop, they are very stable underwater. There is no dramatic shift of air from left to right.
Apeks single cylinder wings are a smart design that allows a cylinder to nest deep inside them. These wings mate up nicely to the rest of the Apeks WTX collection of high quality harnesses, plates and accessories. They can be configured in multiple ways to match the type of diving that you do. As with the rest of the WTX collection, these single cylinder wings are built from the finest quality materials. They are designed by Apeks and built in our own factory.
Apeks WTX-D40 Donut Wing Features
- Inflator:
- K style with brass buttons
- Low profile 16 inch long oval-shaped hose
- Safety cable to prevent hyper-extension
- Positioned off-centre so as not to interfere with regulator 1st stage
- Dump Valve
- Low profile flat valve
- Positioned in front, lower-left side
- Tank Stabiliser Bars
- Drains
- 2 large drain grommets
- Centre mesh drain panel
- The 30lb and 40lb wings are able to accept an optional Retractor Kit, P/N: 388300
- Materials:
- Exterior: 1000D Armorshield Cordura
- Inner air cell: 22 mil (.022) thick black urethane
Zipper: heavy duty YKK #10 plastic zip and slide
Apeks WTX-D40 Donut Wing Specifications
Style | Single Cylinder Wing - Donut |
Inflator | WTX K Style w/ brass buttons |
Airway | 16 inch corrugated hose w/ simple elbow |
Dump valves | 1 Flat Valve - lower left |
Harness | Can be used with WTX or webbed harness |
Weight System | Optional SureLock II |
Drains | Central mesh panel + 2 grommet |
Retractor option | WTX-D30 and WTX-D40 only |
Tank Stabiliser Bars | Yes |
Exterior Material | 1000D Armorshield Cordura |
Inner bladder | 22 mil (.022) thick black urethane |
Zipper | Heavy Duty YKK #10 |
Lift Capacity (lbs/N) | WTX-D40 - 40 lbs |
Warranty | Limited Lifetime |
Note: This item cannot be delivered outside of Australia.
(07/19 LRB)