The OMS Standard Harness with one Shoulder Quick Release is perfect for those who want a quality diving harness with a few extra features over a basic continuous weave harness system.
Only two left.
The OMS Standard Harness system is a cross shoulder harness which uses standard 2 inch (50 mm) webbing. This means each side of the upper harness crosses at the top (behind the diver's head), then joins to the lower assemblies on the opposite side. Top left to lower right and top right to lower left. This is a design for superior comfort.
The OMS Standard Harness system comes with four (4) chest mounted D-rings, two (2) waist strap D-rings, and a crotch strap with scooter O-ring, all made from corrosion resistant stainless steel.
The waist strap is equipped with a latch style stainless steel buckle, and the chest (sternum) strap is adjustable with a squeeze-style side-release plastic buckle. A 1 inch (25 mm) wide crotch strap completes the system.
The OMS Standard Harness comes with an owner's manual and is covered by a 12 month limited warranty.
The OMS Standard Harness System is quickly adjustable and allows the backplate purist to customise his or her harness systems with any or all of the available optional components like: OMS Secure Cummerbund (BCA-CBD2), OMS Back Pad (BCA-BPP) with integral stowage compartment for SMB (Surface Marker Buoy) or Lift Bag, weight pockets, mask pocket etc.
OMS Standard Harness Features
- Quality Diving Harness
- Cross Shoulder Harness:
Upper Harness Crosses at Top (behind the diver's head)
Joins to Lower Assemblies on Opposite Side
Top Left to Lower Right and Top Right to Lower Left
- Stainless Steel D-Rings: (4) Chest Mounted, (2) Waist Strap, Crotch Strap O-Ring
- Waist Strap: Stainless Steel Latch Style
- Sternum (chest) Strap: Plastic "Squeeze-Style" Side-Release Buckle
- 12 Month Limited Warranty
- Owner's Manual
Download/view the OMS Standard Harness User's Guide (PDF, 13 pages, 600 Kb)
Note: Harness only. Pictured backplate not included.