Cressi Gara Modular LD Full Foot Fins

The Cressi Gara Modular LD Full Foot Fin is an altered version of the Cressi Gara Modular fins. The Modular LD focuses on long-distance by taking advantage of softer materials that require less leg power than its predecessor. The blade is made from a thermoplastic material, which is much softer but also much more efficient. The Gara Modular LD is designed to be easy on the feet and leg muscles so that you may cover long distances.

Perfect Choice for Deep Freediving and Spearfishing. Softer Stiffness Blade.

The Cressi Gara Modular LD Fin long blade, foot pocket system makes this a perfect fin choice for deep freediving and spearfishing. Some scuba divers also like using these fins. The modular design lets the user replace/interchange blades for specific diving purposes, which make the perfect fin to grow with, as the diver can change blades as the divers skills increase.

Any standard Fiberglass or Carbon Fiber long blade will interchange in minutes without any modifications to either. The self-adjusting foot pocket is constructed with the most modern multi compound joining process to deliver a foot pocket that can offer comfort and suppleness around the foot where desired and yet have stiffer compounds under the foot pocket and heel area where power transfer takes place. The angle of the blade provides the ultimate in efficiency during the kick cycle requiring less energy to load the blade. Can be comfortably worn with or without neoprene socks.

The foot pocket is available separately for the user to install any standard aftermarket angled or straight blade assemblies. The foot pocket is constructed with the most modern multi compound joining process to deliver a foot pocket that can offer comfort and suppleness around the foot where desired and yet have stiffer compounds under the foot pocket and heel area where power transfer takes place, and the self-adjusting foot pocket expands to be comfortable with or without socks. The Cressi Gara Modular blade is available separately for the user to install in almost any standard angled foot pocket assembly either for an upgrade or replacement.

Cressi Gara Modular LD Features

• Altered Version of Gara Modular Fins
• Softer Thermoplastic Blade
• Require Less Leg Power than Carbon Version
• Softer But Also Efficient
• Designed to Be Easy on Feet and Leg Muscles
• For Long Distance Free Diving and Spear Fishing
• Designed to relieve foot pressure and muscle fatigue
• Modular System: Allows Up-Grade to Stiffer blades (see SKU's CSBCBC and CSBCBBK)
• Foot-Pocket:
• Very Comfortable
• Composite Material
• Soft Rubber Around-the-Foot Arch
• Rigid-Part Along-the-Sides and Traction Surface
• Fins Can-Be Worn with Diving Socks
• Self-Adjusting Foot-Pocket
• Blade Dimensions: (L x W) 76 cm x 21.5 cm (29.9" x 8.47")
• Fin Overall Length: 85 cm To 9.55 cm (33.48" To 35.65") Size Dependent
• Weight (each Fin): Approximately: 915 g (2 lbs)
• Non-Vented Blade Design
• Available in Multiple Sizes

Cressi Gara Modular LD Fin Size Chart

Size selection notes:

• All long bladed fins are typically worn with neoprene socks (also called booties). Even with Cressi's achievement in comfort using a blend of rubbers, blisters or rub can occur after extended use in the water.
• Long lasting quality foot pockets are made of sturdy compounds that will not stretch or "wear-in", even after years of use. If you accidentally select a size too small or tight, try a thinner sock or return them before use for a larger size. A slightly loose fit is ideal to ensure no discomfort during extended use. Please use the size guide above.

Please Note: These fins are typically kept in stock. If we are out of stock in your size, delivery turn-around time is typically 14-21 days post order placement for us to get them from Cressi Italy. Should you have a time restraint on delivery please phone or email the shop prior to placing your order.

(05/16 LRB)