These 90 cm (36 inch) Miflex XT-Tech Low Pressure (LP) BCD / Inflator / Jacket hoses are suitable for most ranges of Inflator, Dry-suit, BCD's, Wings and Jackets where a standard quick release coupler is utilised.
The XT-Tech series of scuba diving medium pressure flexible Inflator hoses has been developed with the main purpose to offer technical divers additional safety with Kevlar reinforcement in the inner braiding, combined with a smooth outer PU layer.
This new inflator hose configuration from Miflex, as it is not positively bouyant, is particularly appreciated because of less abrasion around the neck, allowing the hose to stay in place.
The Miflex XT-Tech Jacket hoses offer the same characteristics of a traditional rubber hose with the plus of being lighter in weight.
The Miflex XT-Tech BCD hose has a polyether based PU thermoplastic inliner with an inner Polyester and Kevlar braiding and an outer smooth layer of thermoplastic. The fittings and the sleeves are made of sea water resistant electroless nickel plated brass.
Inflator Hose Fittings
Miflex XT-Tech low pressure Inflator hoses are supplied fitted with a standard Quick Disconnect Seatec style female side-lock coupler fitting, with an internal Schrader type valve, that accepts the standard BC inflator male QD post. This is the most common design of inflator coupling used in scuba diving. At the other end is a 3/8" UNF male thread to connect the hose to a low pressure port on the 1st stage regulator.
This inflator hose fitting is suitable for the majority of BCD and drysuit applications, but there are a range of fittings that require a different Quick Disconnect fitting. These we accommodate in our range with the use of LP adaptors that can be fitted to our regulator hoses (to convert them to an inflator hose).
Miflex XT-Tech Inflator Hose Features
- For Technical Divers
- Lightweight to Reduce baggage weight when traveling.
- Inner core of Polyether based PU
- Smooth Outer Layer
- Kevlar Reinforcement
- Not Positively Buoyant
- An average longer lifespan than traditional hoses.
- Excellent resistance to abrasion.
- Oxygen ready for use with 100% O2
- A burst pressure more than twice that of traditional hoses.
- Approved and certified to EN250 with standards exceeding these requirements.
- Premium packaging which doubles as a water resistant document wallet or dry bag for phone or car keys - $8 value.
- Miflex hoses are fully recognisable with the Miflex name clearly shown on every fitting, as required under EN250 for product traceability.
- Miflex Quality Manufacturing. Made in Italy.
Miflex Hoses - Dedicated to Quality
Miflex XT-Tech hose production is carried out to the highest quality and standards on the Miflex automated assembly and testing line. Each and every hose is subject to more than 30 individual safety and specification checks, automatically during production, to deliver a product of the highest quality.
Miflex only manufacture their products from the highest quality materials and manufacture to the highest levels of quality available, in their Italian factory. You can recognise a Miflex hose, as they are clearly marked with the Miflex name as all products should show you where they are made, as well as the suitable standards and pressure ratings, including the important EN250 marking.
Miflex offer a full warranty on their hoses and continually review our products to assess and improve any areas as required to suit today's changing diving market and it's requirements.
Miflex provide their hoses in Miflex branded dry-bags. Each bag contains an insert with details of the quality and also information on installation and safety as well as where you can register your purchase of diving hoses.
We recommend that the fitting and installation of all diving hoses should be made by a competent person and using the correct tools. As such we would suggest this is done by a recognised service centre like Scuba Doctor Service and Repairs.
All installation should be made in accordance with the manufacturers recommendations and instructions.
If you are unsure in any way about the installation, please visit The Scuba Doctor for advice.