The X-Adventurer M6000-WRBT is a multi-functional underwater video light with a 6000 lumen 110-degree flood light, a 200 lumen RED LED Light, and a 24W blue light. UltraColour Mode and Ambient Light Mode available when used with an Optional Filter. It's simply the best value for money video light currently available on the market for the serious underwater photographer or videographer.
The 110-degree wide main flood light adopts a COB LED which significantly enhances the Colour Rendering Index (CRI=Ra90) to be very close to midday sunlight with a reduced multi-shadow effect. The UltraColour Mode provides a richer/deeper red to your images by allowing both the White and Red LED's to run at the same time.
The Ambient Light Mode requires the use of an optional Blue Ambient Light Filter designed to convert the white video light to the same spectrum as the ambient light underwater. This is the perfect solution to avoid mixed lighting condition when you white balance the camera to ambient light.
Operating the X-Adventurer M6000-WRBT Video Light is easy, to turn on or off simply push the multi-stage mode switch knob and you can select from 5 LED lighting modes: White, Red, White & Red, Blue & Red or UV Blue. This video light is a truly versatile lighting tool and the swivel control knob allows you to change the power output for main light: 6000 Lumens White Light with 20 levels of brightness @ 45 minutes, Red Light 200 Lumens with 10 levels of brightness @ 420 minutes and Blue UV Light: 24 Watts with 10 levels of brightness @ 700 minutes. The switch also acts as a Battery Life Indicator using a coloured LED backlight battery level indicator built into the control knob so you can instantly know if you're ready for the dive.
The X-Adventurer M6000-WRBT Video Light has a built-in battery level indicator that is incorporated directly into the control knob making it extremely easy to see in the water. The M6000 Video Light control knob has 4 levels for the different light settings, as well as adjusting brightness and on/off settings. The control knob and push-button switch is mounted on the top of the video light and has been designed to be easily operated by the diver even when wearing thick gloves and with just one hand. Incorporated into the base of the light is a built-in infrared signal communication interface which allows for remote control with the optional remote control.
A built-in infrared signal communication interface allows remote control with the optional remote control.
The X-Adventurer M6000-WRBT Video Light is manufactured from a durable and corrosion-resistant Anodised aluminium with a depth rating of 100 metres - 330 ft. This choice of the body helps to keep the weight down for travelling whilst the Anodised aluminium helps to dissipate the heat without compromising durability. The light is double O-ring sealed to make sure that the water stays out. The X-Adventure M6000-WRBT Video Light comes complete with a rechargeable Lithium-ion battery, multi-region Battery Charger, a padded soft EVA carry case, instruction manual, 2 spare o-rings, Ball Mount and a YS mount for easy mounting to your camera arm system.
X-Adventurer M6000-WRBT Video Light Specifications
- Emission Angle: 110°
- Colour temperature: 5000K
- Colour rendering index: Ra=90
- Total luminous flux/Burn Time
- Main Light: 6000 lumen (20 levels of brightness) @ 45min
- Red Light: 200 lumen (10 levels of brightness) @ 420min
- Blue Light: 24 Watt (10 levels of brightness) @ 700min
- Battery Level Indication Colour
- 60% ~ 100%: Blue
- 15% ~ 50%: Green
- 5% ~ 14%: Red
- 5% or less: Flash Red
- Control Methods: Adjustment Knob + Mode Button
- Power supply: Rechargeable Li-ion battery, 3400mAh 50.3Whr
- Depth rating: 100 metres, IPX8 (JIS Protection Class 8)
- Dimensions: Max. diameter 56 mm x 141 mm (without projections)
- Weight: 520 g on land, 220 g underwater (with battery)
- Materials: Anticorrosive aluminium alloy
- Fibre-optic Connection: Allows for light control from a remote on the fly (Remote is Optional)
- 1 x Li-ion Battery
- 1 x Li-ion Battery Charger
- 1 x YS Mount adaptor
- 1 x Ball Mount adaptor
- 2 x Spare O-rings
- 1 x Soft Case
- Owners Manual
This is not a regularly stocked item in our Rye dive shop. It will be ordered for you from the Australian distributor upon request and typically shipped directly from them to you the same day thus resulting in no delay in delivery. However, if they are out of stock this item becomes a special international order, typically resulting in a 4-week delay.