The Sharkskin Envirus Everyday Face Mask is easy breathing, flexible, and comfortable. Specifically designed to be used for long periods every day. NEW! The Everyday mask now features a slot in which a filter may be added. For greater water repellency and protection, we recommend the Envirus Hydrophobic masks.
All Day Protection
Layer 1: The outer fabric is an easy-breathe fabric with an antimicrobial/antibacterial treatment.
Layer 2: The inner fabric finer stitched fabric allowing for better filtration and is permanently anti-microbial thanks to the inherent highly flexible Liquid Titanium woven into the fabric.
Inner and Outer Layers are Australian Made Fabrics.
If worn correctly using both elastic fasteners, the mask will provide a good seal around the face and with the added feature of a flexible nose clamp allowing the mask to mould to any face type and provide a good fit and prevent leakage.
Fit and Comfort: If you observe people wearing masks in public, you will notice there are often gaps either down the side of the nose, under the chin or sides. Sharkskin have used years of tailoring expertise and chosen flexible materials to ensure a comfortable fit that minimises leakage.
Nose Bridge: The bridge of the nose is a point of leakage that affects many masks. Sharkskin has inserted a mouldable, comfortable nose bridge to ensure a better fit and less leakage. Just squeeze gently and push onto the nose and against the face across the bridge of your nose.
Lightweight: The Envirus Everyday mask is a two-layer, lightweight designed. Aimed to provide protection as well as be comfortable and easy breathing. If you wish to add a further protection, we recommend the Envirus Hydrophobic mask.
Over the Head Design: Envirus have tested many designs including around the ear. In their experience over the head designs are more comfortable. Their staff working in the mask construction area are required to wear masks during manufacture and are wearing them for a large part of the day.
Flexible and Adjustable Elastic: Envirus face masks use a thicker high-quality elastic which is flexible and provides a comfortable fit. The masks also feature an adjustable strap to accommodate various face sizes.
Sizing: Masks are unisex, one size fits all design. The face masks feature adjustable straps to accommodate various sizes. Masks will typically fit children above ten years of age.
Environmentally Friendly: Since February 2020, there has been an estimated 70% increase in discarded surgical and medical masks washing up on beaches across the world and also in built-up urban areas plus landfill. The Core ingredient of these masks is Poly Propylene and it does not break down naturally in the environment.
Australian Made: When you buy ENVIRUS you get the best money can buy, the service only a local manufacturer can give and you support fellow hardworking Australians. Envirus handcraft these Masks in their own Australian factory to the highest standard and use only the best materials available.
Sharkskin Envirus Everyday Face Mask Features
- A multi-layer design
- Outer layer is an easy-breathe fabric with an anti-microbial/anti-bacterial treatment
- Inner layer fabric is finer stitched fabric allowing for better filtration
- Inner layer is permanently antimicrobial with highly flexible Liquid Titanium woven into the fabric
- Fabric kills viral bacteria
- Comfortable and mouldable nose bridge for a better fit and less leakage
- Reusable and Washable
- Built to minimise air leakage
- Flexible and breathes very well
- Australian Made
Frequently Asked Questions
What is Liquid Titanium and how does it work?
Liquid Titanium is a brand name. The product infuses titanium nanoparticles in fabric for their anti-microbial properties. Envirus has developed a new fabric which will soon be available with enhanced antimicrobial properties.
Are your masks reusable?
Yes, Envirus have tested the Hydrophobic masks for 30 Industrial Wash Cycles. The mask still repelled water and had no apparent degradation of water repellent properties. We would recommend replacing masks in less than 30-50 washes depending on condition.
How many layers are in the mask?
The Everyday mask features two layers. The Hydrophobic mask features two layers with a pouch where a PM2.5 Filter may be added to provide extra protection, essentially applying three layers.
Where are the masks made?
Envirus masks are made in Newcastle, NSW by their team of designers and seamstresses.
Can I wash the PM2.5 filter?
No, While the masks are reusable the filters are not designed to be washed.
Can I exercise in my mask?
The World Health organisation states people should NOT wear masks when exercising, as masks may reduce the ability to breathe comfortably. Sweat can make the mask become wet more quickly which makes it difficult to breathe and promotes the growth of microorganisms. The important preventive measure during exercise is to maintain a physical distance of at least one and a half metres from others.
Do you make masks for children below the ages of ten?
Currently, Envirus do not offer facemasks for children below the ages of ten. However, Envirus is a continually evolving brand and is currently developing further products. Stay on the lookout for updates.
How To Wear A Facemask?
Cloth face masks should be worn in public settings where social distancing measures are difficult to maintain, such as in supermarkets and in areas of significant community-based transmission. Masks are considered an additional measure and are not a substitute for other safe practises such as social distancing, proper hand sanitising and testing.
- Sanitise hands before handling mask
- Place mask over mouth and nose
- Pull elastics over head for snug fit
- Mould nose bridge to fit face
- Do not touch your mask while wearing it
Remove the mask by lifting off without touching the front of the mask or your face. Wash your hands immediately after removing your mask. If you accidentally touch your mask, wash or sanitise your hands. Wash in hot water with detergent between use and dry.
For more information on fitting masks and best practises head to the World Health Organisation page Coronavirus disease (COVID-19) advice for the public: When and how to use masks.
- Wash Masks at 60 degrees celsius using mild detergent.
- Do not use Chlorine
- Do not use Bleach
- Avoid Rough Surfaces
- Warm to Hot Tumble Dry
- Everyday Mask: Water Repellent treatment will degrade over time.
- Hydrophobic Mask: Has been tested at 30+ wash cycles with no visible degredation of water repellancy.
IMPORTANT: Make sure you wash your hands thoroughly with soap or sanitiser before fitting. Look in the mirror to check fit and check for potential leak points. Do not touch the front of a mask once fitted. Remove using straps without touching the front of the mask. Wash in hot water with detergent between use and dry.
DISCLAIMER: There is no guarantee that any mask will protect against infection and masks are not a substitute for all other precautions including social distancing and proper sanitisation of hands. While Sharkskin has used the best information available to them, information evolves on a regular basis and Sharkskin make no specific claims regarding the effectiveness of the masks against Coronavirus COVID-19.
Sharkskin Envirus Research
Sharkskin Envirus is a proudly Australian owned manufacturer who makes high-quality reusable cloth face masks suitable to assist in the prevention of the spread of COVID-19.
The function of cloth masks in containing the spread of COVID-19 has been advocated widely both in Australia and across the world. At Envirus they aim to take it one step further and provide a mask solution that provides a greater level of protection than standard cloth. As such they have made their initial mask offering out of specifically selected fabrics, with inherent waterproofing and/or Antimicrobial and Antiviral properties.
Initially they have employed a cloth containing Liquid Titanium which is a brand name associated with a fabric that incorporates charged Titanium dioxide (TiO2) particles which are incorporated into the yarns. Titanium dioxide (Britannica: Titanium dioxide) naturally occurs as a powder and is widely used today as a white pigment and in the pharmaceutical industry in such products as toothpaste, cosmetics and sunscreen. Liquid Titanium yarns were patented in 2013 and have many claimed therapeutic benefits and as such have already been used in the equine industry for many years.
The therapeutic claim of Liquid Titanium fabric that interests Envirus, is that it has antimicrobial and antiviral properties. This claim is at least partly supported by numerous independent scientific reports on the antimicrobial and antiviral properties of Titanium dioxide itself in various forms. See Interaction of titanium dioxide nanoparticles with influenza virus, and Antibacterial and antiviral potential of colloidal Titanium dioxide (TiO2) nanoparticles suitable for biological applications.
As COVID 19 is relatively new, little research is available specific to a COVID virus however substantial research is now being undertaken globally as to how this fabric and nanotechnology can assist in the fight against the COVID-19 global pandemic. See Nanotechnology and nanomaterials solutions for COVID-19: diagnostic testing, antiviral and antimicrobial coatings and surfaces, air-borne filtration, facemasks, PPE, drug delivery and therapeutics.
Even though not all the research has been completed, whilst Envirus catch-up, they still felt the need to get the best possible product into the Australian market now as the need is urgent. This is unusual, but as most of you will appreciate, these are unprecedented times.
Please do note that Envirus are confident in their products and are in the process of undertaking our their independent research and gaining accreditations for their products and the fabrics they use. Envirus is currently working with the Australian Federal Government through the Innovations Connections Facilitation program who have connected Envirus into both the CSIRO and other Australian research facilities to undertake testing and product development which includes the following:
- Antiviral properties including surface efficacy testing via Associate Professor Nathan Bartlett, Head of Viral Immunology and Respiratory group, Hunter Medical Research Institute (HMRI)
NB: this test uses the virus OC43 which is in the same genus as SARS-CoV-2 (COVID 19).
- Differential pressure test (EN 14683Annex C) via CSIRO
- Blood penetration testing (ISO 22609) as referenced by AS 4381:2015 for P2 medical masks via CSIRO
- Blood filtration efficiency test (EN 14683 Annex B) also as referenced by AS 4381:2015
As soon as Envirus have the test results available they will be making their announcements.
Please also note Envirus are also going to be testing various other fabrics including one that contains silver as independent research has also shown silver also has antiviral properties, see Silver Nanoparticles as Potential Antiviral Agents. As Envirus complete testing they hope to improve and extend their range of products so they can, in turn, provide you with their customers, with the best available product, most suitable to your specific needs.
All Envirus tests will be conducted on both the raw fabric and on products that have undergone repeated and numerous uses, and washes to confirm the products truly are reusable.
At Envirus their message remains unchanged:
- They are a proudly Australian owned company looking to support the Australian economy by maintaining and growing Australian based manufacturing capability
- They aim to be part of the solution to protecting the Australian public from the blight of COVID-19 (in conjunction with social distancing and the other government recommended actions)
- They want to reduce the environmental impact of COVID-19 by reducing the amount of disposable PPE that is ending up in our landfills and our oceans
- They want to grow the company so they can showcase Australian quality and provide their product worldwide
SHARKSKIN™ is proudly Australian Made and Owned, manufactured in Newcastle, NSW. Sharkskin created the category of technical watersports apparel more than 25 years ago and since then they have made more than one million garments in their own factory and proudly export this Australian made range all over the world.