The Apeks WTX Tek Small Cargo Pocket can be fitted to the front of the Large Cargo Pocket, or directly to the WTX harness. It is an excellent size for carrying slates, floats, line markers or extra weights. The small pocket employs a hook n' loop closure that is easy and fail-safe. 4 rear brass grommets allow the pocket to attach directly to the WTX harness waistband using a hardware kit.
The Small Cargo Pocket comes equipped with a side attachment D-ring and a front pull D-ring for fast pocket access. Has two web loops to slide over standard 2-inch (5 cm) waistband webbing. The pocket is made from durable 1050D ballistic nylon, has internal loops for bungee cord attachment, and a bottom brass drain grommet.
The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits or scaled down to make a travel-friendly set-up suitable for any diver. A full range of TEK pockets has been designed to complement the WTX range. They can be attached to your WTX system or any other BC/Wing and/or drysuit. The system is modular so you can attach one pocket to the other if space is at a premium. A separate stainless steel hardware kit is available for this.
Apeks WTX Tek Small Cargo Pocket Features
- APEKS WTX BC Cargo Pockets:
- Unparalleled Versatility, Modular Nature of System
- Full Range of TEK Pockets Designed to Complement WTX Range
- Can Be Attached to WTX System or Any Other BC/Wing and/or Dry Suit
- System: Modular Attach One Pocket to Another If Space Is-At-A-Premium
- Construction: Durable 1050D Ballistic Nylon
- Internal Loops for Bungee Cord Attachment
- Bottom Drain Grommet
- All Grommets Brass Construction
- 4 Rear Grommets: Allows Pocket to Attach Directly to WTX Harness
- Small Cargo Pocket:
- Attaches Directly to WTX Harness
- Excellent Size for Carrying Slates, Floats, Line Markers or Extra Weights
- Hook N' Loop Closure, Easy and Fail-Safe Design
- Side Attachment D-Ring
- Front Pull D-Ring for Fast Pocket Access
- Two Web Loops to Slide Over Standard 2-inch (5 cm) Waistband Webbing
Apeks WTX Tek Small Cargo Pocket Specifications
- Material: 1050D ballistic nylon
- Size: 7.5-inch x 6.5-inch
- Rear attachment grommets: 4, brass
- Drain grommet: 1, brass
Apeks WTX Tek Pocket Range
The full range of Apeks Tek Pockets have been designed to complement the WTX range. They can be attached to your WTX system or any other BC/Wing and/or drysuit.
Apeks WTX Tek Pocket Features
- The system is modular so you can attach one pocket to the other if space is at a premium. A separate stainless steel hardware kit is available for this
- The large pockets are available in heavy duty hook and loop and zipper versions, allowing for easy open / close even when wearing thick gloves
- The pockets contain internal bungee attachment points to clip your gear to
- LARGE THIGH POCKET (BT115135) - with large volume capacity and extra security of leg band to carry reels, spools, torches or knives
- LARGE CARGO POCKET (BT115134) - with Zip Closure and capability to fix directly to Waistband grommets, or straight over the side Lobe even after Diver is kitted up
- SMALL CARGO POCKET (BT115133) - fits to the front of the Large Cargo if desired. For carrying, slate, floats, line markers or extra weights
- SMALL MESH POCKET (BT115132) – For carrying SMBs, or a redundant mask
Note: This product can only be shipped to an Australian address.