Shop by Category

banner banner

Apeks WTX-D60 Donut Wing - Twin Cylinder

$880.00 Sale:$765.60

Max: 2

The Apeks WTX-D60 Twin Cylinder Donut Wings with 60 lb lift capacity are designed for twin set diving and perfectly complement the Apeks range of twin manifolds and the Tek3 regulators. Often referred to as donuts, the WTX-D60 wings are oval shaped air cells or bladders that are not permanently attached to a harness. Not only are these donut wings streamlined, but due to their shape being a continuous loop, they are very stable underwater. There is no dramatic shift of air from left to right.

Much thought and design work has gone into the Apeks twin cylinder wings. Special attention has gone into the fabrics and hardware selected, the shape of the wing, the water drainage and the construction techniques. When you buy Apeks, rest assured that you are buying the best product available.

Apeks WTX-D60 Donut Wing Features

  • Inflator:
    • K style with brass buttons
    • Low profile 16 inch long oval-shaped hose
    • Safety cable to prevent hyper-extension
    • Positioned off-centre so as not to interfere with regulator 1st stage
  • Dump Valve
    • Low profile flat valve
    • Positioned in front, lower-left side
  • High-efficiency drains to drain water quickly
  • Access zipper is located on front side to prevent abrasion from cylinders and tank bands
  • Able to accept an optional Retractor Kit, P/N: 388300
  • Centre foot print matches the Apeks plate.
  • 3 upper grommets allow various height settings coupled with a lower slot that compensates for misaligned band bolts.
  • Materials:
    • Exterior: 1000D Armorshield Cordura
    • Inner air cell: 22 mil (.022) thick black urethane
      Zipper: heavy duty YKK #10 plastic zip and slide

Apeks WTX-D60 Donut Wing Specifications

Style Twin Cylinder Wing - Donut
Inflator WTX K Style w/ brass buttons
Airway 16 inch long corrugated elliptical hose, 90° elbow at top, internal safety cable
Dump valves 1 Flat Valve - lower left
Harness Can be used with WTX or webbed harness
Weight System Optional SureLock II
Drains Central mesh panel + 2 grommet
Retractor option Yes
Exterior Material 1000D Armorshield Cordura
Inner bladder 22 mil (.022) thick black urethane
Zipper Heavy Duty YKK #10
Lift Capacity (lbs/N) WTX-D60 - 60 lbs
Warranty Limited Lifetime

Note: This item cannot be delivered outside of Australia.

(04/22 AJG)

The Scuba Doctor Australia
Boon Wurrung Country
1/49 Peninsula Ave
Rye Victoria 3941, Australia
Commonwealth Coat of Arms
We accept Purchase Orders from Government Departments & Schools
P +613 5985 1700
Opening Hours
Shop by Category
Copyright © 2005-2024 by The Scuba Doctor Australia, ABN 88 116 755 170. All rights reserved. tel. +61 3 5985 1700 :: email. :: Web site by it'sTechnical 2022