Shop by Category

Info

Shearwater Sale!bannerAVATAR RUNOUT! 50% OFF!banner

Apeks WTX Harness | Medium

BT1210101M
Apeks
$740.00

Qty:         

Up to 3 days for dispatch

The Apeks WTX Harness is the most versatile one from Apeks and it features a range of customisation options. The sturdy construction combined with high-quality, rugged materials make this harness a foundation for many single and twin cylinder diving configurations. Divers who want to build their own BCD and backplate setup but don't want to go full DIR will want a harness system like this. The padding on the backplate and shoulder straps will be more comfortable if you're diving in warmer waters and wear thinner suits.

The Apeks WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the entire system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver. This harness is Apeks's most versatile yet featuring a range of customisation options. Can mount directly to a single cylinder using dual nylon cylinder bands or a single tank adaptor. Can accept a WTX Back Plate for heavy loads such as twin steel cylinders. Multiple grommet settings on the waistband allow the attachment of the SureLock weight system.

Open shoulder design allows diver to add or remove hardware for total customisation. Made from rugged 1050D Ballistic Nylon. Removable crotch strap made of 5 cm (2 inch) soft webbing. Six 5 cm (2 inch) stainless steel D-rings (2 x angled on shoulders, 2 on the hips, and 2 on the crotch strap) for accessory attachment. Two 2.54 cm (1 inch) stainless steel D-rings along the lower back are for marker buoys, reels or other accessories and six on the back pad. Removable back pad. Heavy-duty waist buckle made of stainless steel. Stainless steel tri-loaders distribute the load between the back, waist and shoulders for a great fit. SOLAS reflector airway hold-downs can be removed or repositioned. Chest strap comes standard. Includes two tank bands for single cylinder use. Harness is available in multiple sizes.

Apeks WTX Harness Features

  • Unparalleled Versatility, Modular Nature of System
  • Harness APEXS Most Versatile Featuring Range of Customisation Options
  • Mount Directly to Single Cylinder Using Dual Nylon Cylinder Bands or Single Tank Adaptor
  • Can Accept WTX Back Plate for Heavy Loads Such as Twin Steel Cylinders
  • Multiple Grommet Settings On Waistband for SureLock Weight System
  • Open Shoulder Design Allows Diver to Add or Remove Hardware
  • Designed for Total Customisation
  • Rugged 1050D Ballistic Nylon
  • Removable Crotch Strap Made of 5 cm (2 inch) Soft Webbing
  • Six 5 cm (2 inch) Stainless Steel D-Rings:
    Two Angled On Shoulders
    Two On Hips
    Two On Crotch Strap
  • Two 2.54 cm (1 inch) Stainless Steel D-Rings:
    Along Lower Back For Marker Buoys, Reels or Other Accessories
  • Six Stainless Steel D-Rings on Back Pad
  • Removable Back Pad
  • Heavy-Duty Waist Buckle Made of Stainless Steel
  • Stainless Steel Tri-Loaders: Distribute Load between Back, Waist & Shoulders for Great Fit
  • SOLAS Reflector Airway Hold-Downs
  • Hold-Downs: Removeable/Repositionable
  • Chest Strap Comes Standard
  • Includes Two Tank Bands
  • Available in Multiple Sizes

Apeks WTX Harness Size Guide

Use this guide to find the best size for your new Apeks WTX Harness. Please contact us if you require any further assistance or advice.

Size Waist Range Over The Shoulder Range *
  WTX Harness Only WTX Harness with
SureLock Weight System
 
SM 29-60 in / 74-152 cm 33-60 in / 84-152 cm 34-43 in / 86-109 cm
MD 29-60 in / 74-152 cm 33-60 in / 84-152 cm 36-45 in / 91-114 cm
LG 32-60 in / 81-152 cm 36-60 in / 91-152 cm 40-49 in / 102-125 cm
XL 34-60 in / 86-152 cm 38-60 in / 97-152 cm 42-51 in / 107-130 cm

* Measured from centre of waistband front to centre of waistband back

Note: This item cannot be delivered outside of Australia.

(10/22 HS)


The Scuba Doctor Dive Shop Logo
Connect with us on Facebook - scubadoctor  View our YouTube Channel - ScubaDoctorRye  Follow us on Instagram  View us on Pinterest - scubadoctor  Follow us on Twitter - @scubadoctor
The Scuba Doctor Australia
Boon Wurrung Country
1/49 Peninsula Ave
Rye Victoria 3941, Australia
Commonwealth Coat of Arms
We accept Purchase Orders from Government Departments & Schools
Contact
P +613 5985 1700
E diveshop@scubadoctor.com.au
-------------------------
Opening Hours
-------------------------
Shop by Category
-------------------------
Brands
Copyright © 2005-2024 by The Scuba Doctor Australia, ABN 41 677 592 166. All rights reserved. tel. +61 3 5985 1700 :: email. diveshop@scubadoctor.com.au :: Web site by it'sTechnical 2022