Shop by Category
Info
- This product is also found in:
- Regulator Accessories / Parts
- Instrument Accessories / Parts
- Regulator Hose Adaptors
- Miflex Hose Adaptors
- Sidemount Diving
- Reels and Emergency
This Sonar Air-Spool / Swivel Spool with Standard O-Rings and Standard Shoulder Design, and chrome plated brass construction, is typically required as a swivel between your high pressure (HP) hose and surface pressure gauge (SPG), or your air integrated console dive computer.
It's also typically used with the Alpha AHA-5 adaptor to fit a computer transducer with a 15 cm (6 inch) long high pressure hose to a high pressure port on your first stage regulator. Technical divers often use this air spool when connecting an SPG on a short 15 cm (6 inch) long high pressure hose to their stage/pony cylinder first stage regulator.
This air-spool is made from Brass with a Chrome Plated Finish and comes with two standard O-Rings. This air spool should not be used with Enriched Air Nitrox (EAN). It's standard shoulder enables it to be used with a Surface Pressure Gauge that requires an airspool with a centre bushing.
Essential Save-a-Dive Kit Item
You just set up your equipment for the first dive of your vacation in Saint Somewhere, as you pressurise your scuba regulator system you hear air leakage. As you examine your rig you find that the source of the leak is your Surface Pressure Gauge (SPG) or Air Integrated Computer Console. The worst thing that can happen on a tropical vacation has just happen - No SPG or Dive Computer. Don't leave on a vacation without spare parts that can quickly and easily fix a problem.
Between the High Pressure Hose and the Pressure Gauge/Computer is a small brass pin with an O-Ring on each end called an Air-Spool. This simple, yet important part can make or break a diving vacation. Don't leave on a vacation without a spare air spool, why ruin a great holiday because of a few dollars in spare parts.
Sonar Air-Spool with Standard O-Rings and Standard Shoulder Features
- Air-Spool with Standard O-Rings
- Chromed Brass Construction
- Not Nitrox Compatible
- For Gauges Requiring Air-Spool with Centre Bushing
- Great Save-a-Dive Kit Item
Please note: If the HP Hose and SPG you're connecting will be used with Nitrox, you'll need an air-spool with standard shoulder design and Viton O-Rings.
(03/22 HS)