This Swivel-Pin Air-Spool with Viton O-Rings and Standard Shoulder Design, and chrome plated brass construction, is typically required as a swivel between your high pressure (HP) hose and surface pressure gauge (SPG), or your air integrated console dive computer.
It's also typically used with the Alpha AHA-5 adaptor to fit a computer transducer with a 15 cm (6 inch) long high pressure hose to a high pressure port on your first stage regulator. Technical divers often use them when connecting an SPG on a short 15 cm (6 inch) long high pressure hose to their stage/pony cylinder 1st stage regulator.
This swivel-pin air-spool is made from Brass with a Chrome Plated Finish and comes with two Viton O-Rings. This air spool can be used with Enriched Air Nitrox (EAN). It's standard shoulder enables it to be used with a Surface Pressure Gauge that requires an airspool with a centre bushing.
Essential Save-a-Dive Kit Item
You just set up your equipment for the first dive of your vacation in Saint Somewhere, as you pressurise your scuba regulator system you hear air leakage. As you examine your rig you find that the source of the leak is your Surface Pressure Gauge (SPG) or Air Integrated Computer Console. The worst thing that can happen on a tropical vacation has just happened — No SPG or Dive Computer. Don't leave on a vacation without spare parts that can quickly and easily fix a problem.
Between the High Pressure Hose and the Pressure Gauge/Computer is a small brass pin with an O-Ring on each end called a Swivel-Pin Air-Spool. This simple, yet important part can make or break a diving vacation. Don't leave on a vacation without a spare airspool. Why ruin a great holiday because of a few dollars in spare parts.
Air Spool with Viton O-Rings and Standard Shoulder Design Features
- Swivel Pin Air Spool with Viton O-Rings
- Chromed Brass Construction
- Nitrox Compatible
- For Gauges Requiring an Air-Spool with Centre Bushing
- Great Save-a-Dive Kit Item