Navigation
All of the accessories to get your scuba diving, freediving or spearfishing weight system fully sorted are available from The Scuba Doctor at everyday low prices.
Technical Tip
Threading a 3-Slot Quick-Release Belt Buckle
Starting from the front of the metal buckle, thread the left waist strap through the larger end slot of the buckle. Position the buckle approximately 45 cm (18 inches) of webbing length from the plate left waist slot. Then thread the webbing from the back through the centre slot and through the front of the inner most slot. Then thread the webbing through the back of the larger end slot so there are two thicknesses of webbing through one slot and pull the weave tight.
Threading a 2-Slot Quick-Release Belt Buckle
While we don't recommend the use of 2-slot belt buckles, if it's all you have then this is the way to thread them.
See also, How to Thread a Weight Belt Buckle.
Information coming soon!
![Halcyon Infinity 30lb System [SS Small Backplate]](/diveshop/images/halcyon/Halcyon-Evolve-Wing.jpg "Halcyon Infinity 30lb System [SS Small Backplate]")
Copyright © 2005-2022 by The Scuba Doctor Australia, ABN 88 116 755 170. All rights reserved.
tel. +61 3 5985 1700 :: email. diveshop@scubadoctor.com.au :: Web site by it'sTechnical 2022