For Dive Shop Sales
Call 03 5985 1700

Prev
  • E-Shark Force Scuba Tank Unit
Next

E-Shark Force Scuba Tank Unit

$799.00  $719.00
Save: $80.00 (10%)

  • Model: ESA00920
  • Brand: E-Shark Force
Qty:   

Product Description

The E-Shark Force Scuba Tank unit connects to your scuba cylinder/tank by an elastic band over the valve assembly, and a strap around the middle. It stays in the water behind the with you as you dive. The device activates in salt water, and stays active for a good long session from 3-4 hours, longer than most dives. The Nylon strap is extremely durable and the device needs only a thorough rinsing in freshwater when you are finished. The charging pad can also be plugged into a computer or portable solar panel, using a USB connection, in areas where there is no ready electrical current. It takes approximately 3 hours to fully recharge the E-Shark Force device.

The E-Shark Force Tank Unit can keep sharks away from divers and free up valuable space on the ankle, for a dive knife or other device. It will keep sharks away from divers for 3-4 hours on a charge, which could mean two dives, not just one. It is easy to care for by rinsing with clean water (not salt water), and easy to charge by resting it on the charging pad.

E-Shark Force Scuba Tank Unit Specifications

  • Depth: 43 metres (140 feet) maximum
  • Power: Internal 3.7 Volt Li-ion battery
  • Battery Charger: 6 VDC, 1.0 Amp wall transformer
  • Charging Time: Approx. 6-8 hours
  • Operational Time: 4-6 hours (in water)
  • Output: 120V to 200V pulsed proprietary wave form
  • Electrodes: 2 stainless steel mesh electrodes

The E-Shark Force Scuba Tank Unit device comes in a clear box that measures 7.2" x 4.5" x 3". It contains the device, a User Manual, and a Qi charging pad. The charging pad has a 3 foot micro USB to USB cable, so it can connect to anywhere that has a USB outlet: a computer, an outlet converter, a car charger, or some phone chargers. This E-Shark Force Device charges easily on the charging pad by just resting it so the light comes on. It takes about 3 hours to charge. Make sure to charge it before the first use. A full charge should last 3-4 hours.

E-Shark Force Scuba Tank Unit Directions

Here is your quick Charging Guide:

  1. Plub enclosed USB cord into outlet with a USB port, or computer USB port.
  2. Plug other end of this cord all the way into the charging pad onthe side.
  3. Make sure the outlet or power source is on.
  4. Gently lay E-Shark Force device with the logo side down onto the top of the charging pad (the side with the red circle).
  5. A Blue light on the pad will quickly come on and go off, indicating that the pad is charging the device.
  6. Wait for at least a full minute before a light on the side of the device shows green, then turns to blinking red to indicate charging.
  7. After device has fully charged (in a few hours), the light will show steady green until you lift the device off the charging pad, ready to wear.

E-Shark Force Comparison Brochure (Adobe PDF, 2 pages, 810 Kb)

(05/16 LRB)